Tuesday, June 5, 2012

Terne over a new roof

The original Terne roof was applied in
1898.  Pin holes, loss of coating and
breaches in the membrane left few
options for the rehabilitation.
The roof on a century-old railcar is more than just something to keep the rain out; it is a distinguishing feature.  On chapel car 5 Messenger of Peace, the roof is particularly important for what it was made of: Terne metal.  The vast majority of 19th and early 20th Century rail passenger cars had a canvas roof supported by a wooden deck.  The chapel car was built with a 28 gauge Terne sheet metal roof supported by a wooden deck.  It debuted in its natural state and over a short period of time oxidized to a pleasant pewter-like appearance.  In later years as the roof began to show its age, it was coated with paint and other materials to seal leaks.
Orignal Terne sheet metal produced by
Piqua in 1898.  The pewter-like
appearance is oxidation accelerated
by air pollution.  The seams were
sealed with lead solder.
Terne metal has been around for more than 200 years and in its earliest form was sheets of wrought iron coated with an alloy of tin and lead.  Thomas Jefferson’s Monticello was roofed with Terne metal at his request, and other important 19th Century structures that were built to last also received the same treatment.  As technology improved, Terne roofing was offered as light sheet metal with its corrosion-resistant coating on both sides.  Light-weight Terne roofing could be used in a variety of lighter constructs – such as a railcar roof.

Original sheet metal roof was carefully
torn up to  allow depair of the deck.
The "holes" behind Gary were for the
kerosene lamp chimneys.
Chapel car 5 was built with a traditional Terne-coated 28 gauge carbon steel roof.  The light gauge sheets performed for more than 100 years but by the time the car arrived at the Museum, the sheets were heavily compromised with pin holes.  Complicating how this would be mitigated was the unknown condition of the underlying decking: the only way to inspect and repair was to remove the metal sheets.  It was not practicable to remove the original sheets and reuse them.  And the Museum's concern was justified: several areas of previously undetected deterioration were discovered as the original Terne metal was removed.  The ends hoods in particular had issues and new "green" white oak lath was steamed and applied to the damaged areas to rehabilitate them as new. 
New panels on the upper deck.  Metal will be kept in its natural
state in keeping with the original treatment.
A team of two sheet metal specialists
applied the new Terne II sheets.  The
center panel of the upper deck slid
over the two side panels.
So what is the Terne coating?  Originally it was an alloy of approximately 79% lead and 19% tin.  So why tin?  Tin allows the molten lead to ”stick” to the carbon steel, which it ordinarily would not.  The other 2% of the alloy is additives such as antimony to adjust characteristics such as melting point.  Today, a concern over lead in the environment has evolved the product into an alloy of zinc and tin, which is now known as Terne II and is manufactured by Follansbee. Seams of Terne II sealed with tin solder. 
The hoods on the ends of the roof
were particularly challenging.
The new Terne II metal was available to the Museum in a coil steel format.  So large coils were purchased, sheared by sheet metal specialists, and each edge bent to 90 degrees.  Individual sections of roofing are connected to each adjacent panel by folding the edge of the panel over the edge of the next panel and rolling it smooth.  The seam was soldered with tin to complete the seal; work was performed by Trinity Sheet Metal of Granite Falls, WA.  In all, more than 1,800 linear feet of soldering was required to complete the roof.  The new roof – as with the original – will be left uncoated and untreated.  Over time it will oxidize to a pewter-like patina, though ironically because of cleaner air today this process will take considerably longer than it would have in 1898.
The completed roof is striking and a is
an appearance not seen for generations.
Work was completed in May and substantially completed the roof area of the chapel car.  Special thanks to major funders including the National Trust for Historic Preservation's Partners in Preservation (funding by the American Express Foundation), Save America's Treasures, 4Culture, and the Washington State Heritage Capital Projects Fund administered by the Washington State Historical Society. 

9 comments:

David said...

Spike, Well I sure learned something new today...terne metal... The detail and dedication involved in just reconstructing the roof of the chapel car is a bit mind boggling. The result is very striking... Take Care, Big Daddy Dave

Unknown said...
This comment has been removed by the author.
Unknown said...

I admire the valuable information you be offering for your articles. I will be able to bookmark your blog and feature my children test up right here generally. I'm relatively sure they're going to be informed a variety of new stuff here than any one else! Flat Roofs North East

bob said...
This comment has been removed by a blog administrator.
A Class Fabrication said...

Nice Post
Check Me Out
Shingle installation in Chilliwack

best Front Range Local Roofers You Can Count said...

Thanks for sharing this useful information.
best Front Range Local Roofers You Can Count

Safeway Driveways Yorkshire said...

Safeway Driveways Yorkshire specialises in block paving and tarmac. We provide you with high-quality items that are constructed from high-quality materials and provide you with great performance along with durability and dependability.

Alpha Team Roofing said...

I recently came across Alpha Team Roofing's website while searching for information on Austin metal roofing. I must say, I'm thoroughly impressed with the wealth of information and services they provide when it comes to metal roofing solutions in Austin.

Their website is not only visually appealing but also user-friendly, making it easy to navigate and find the specific information I was looking for. The detailed descriptions of their metal roofing services, along with the informative blog posts, have been incredibly helpful in my research.

What I appreciate most is the transparency they offer regarding the benefits of metal roofing in the Austin climate, including its durability, energy efficiency, and how it can withstand the Texas weather. It's clear that they are experts in the field and are passionate about helping customers make informed decisions.metal roofs 

Alpha Team Roofing said...

A metal-roofs-austin  is a fantastic choice for homeowners in this sunny and sometimes stormy city. Metal roofing offers durability, energy efficiency, and a sleek modern look that can enhance the curb appeal of any home. With the hot Texan summers and occasional severe weather, a metal roof can provide reliable protection and long-lasting performance. If you're considering a metal roof for your Austin home, make sure to consult with experienced roofing professionals who understand the unique climate and architectural styles of the area to ensure a perfect fit for your property